Tools

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Thin walled spanner wrench designed specifically for installation and removal of O.E. and 23000 series screw in 4WD alignment sleeves.

This set safely removes and replaces GM,Ford and Chrysler wire wheel hubcap locks on 1978 and up vehicles. Variable drive keys will also fit Corvette,McGard hubcap locks and aftermarket wheel lug locks. Kit comes in durable plastic carrying case with...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Every alignment tech needs this tie rod wrench set in their tool box. Adjust inner tie rods with this easy to use 4 piece wrench set. The wrenches feature spring loaded toothed jaws and sturdy grips to make toe adjustments quick and easy. This set of...

FOR MODEL#S 67BSD,67DLX,67GSA,69DXL,701ECF,601PF--- FMC or Barrett 400,500,700 Hoffmann/RJ West True-Cut 400/401 OEM Part # 90488--- Perfect Equipment Models 400 & 450 Twin Turn ---3 cut edges---positive rake with .020 radius. Left & Right hand tool...

For Model #s 67BSD,87DLX,67GSA,69DLX,701ECF,601PF--- FMC OR Barett 400,500,700 Hoffmann/RJ West True Cut 400/401 Hoffmann/RJ West part# 722-83-4--- Perfect Equipment Model # 400 & 450 Twin Turn -Part # W139 ---3 cut edges---positive rake with .020 radius...

For model #s 67BSD,67DLX,67GSA,69DLX,701ECF,601PF--- FMC or Barrett model 400,500,700--- OEM Part#90487 Hoffmann/RJ West part#722-83-4--- Perfect 400 & Twin Turn-Perfect Part # W139---3 cut edges ---positive rake with .020 radius. Left & Right hand...

A handy chromoly steel compressor designed to fit inside most coil springs with an internally mounted shock. Will accomodate spring lengths from 8-1/4" to 14". It can be used on any coil spring with a minimum inside diameter of 3-3/8" to a maximum...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

When used with #499, this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Made to remove the transaxle assembly without damaging the transmission case or inside roller bearing.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This master balljoint separator set from SPC is a must for any technician replacing balljoints, control arms, or tie rod ends on today's car and SUV's. With 4 different opening sizes ( 24mm, 27mm, 31mm, 36mm ) a threaded height adjustment and 2 different...

Stop damaging steering knuckles by removing linkages or struts with pry bars, screwdrivers and hammers. Use the Steering Knuckle Spreader Tool to make quick work of tight and corroded steering knuckles by simply turning the threaded wedge assembly...

Use this tool to safely and easily expand steering knuckles. Pry bars can damage the knuckle, but this tool allows safe expansion with the tool adjustment nut. Designed to operate within a 4.4 - 10mm range, this expansion tool will fit most makes and...

The best tool for removing or installing passenger car and light truck wheel weights. Incorporates hooks for removal of wheel weights on many different types of wheels. Not for use on aluminum or decorative wheels.

Camber change on the 2007 and up Sprinter van is quick, easy and locked in with this SPC cam kit. Get up to ± 3.0° camber change by simply removing the upper OE bolt, loosening the lower bolt, installing and adjusting this cam kit to the desired change...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This set centers both steer axle wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. These sleeves are made specifically for the 'TAG' axles with Accu-Ride 19.5" wheels.

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and and tightened in an "off center" or clocked position. Designed for UD and Volvo trucks with Hungarian made Alcoa wheels (26.0mm...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Using a shop press, the adapter is designed for quick, easy removal & installation of the 15619 xAxis sealed flex joint and any other bushing with a 2.25" OD.

Using a shop press, the adapter is designed for quick, easy removal & installation of the 15609 xAxis sealed flex joint and any other bushing with a 2" OD.

Using a shop press, the adapter is designed for quick, easy removal & installation of the 15613, 15615, and 15616 xAxis sealed flex joints or any other bushing with a 1.8125" OD and up to 2.5" wide.

Using a shop press, the adapter is designed for quick, easy removal & installation of the 15607 xAxis sealed flex joint and any other bushing with 1.75" OD.

Using a shop press, the tool is designed for quick, easy removal & installation of the 15605 xAxis sealed flex joint and any other bushing with a 1.25" OD.

Using a shop press, the tool is designed for quick, easy removal & installation of the 15617 xAxis joint when building your own Jeep JK track bar.

For use on most cars and some light trucks. The tapered wedge easily removes the pitman arm from the shaft with just a few sharp hammer blows. DIMENSIONS: 1" opening, 12" overall length.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

This 3 piece set includes: 3.0", 3.5", 4.0" - Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications...

This 5 piece set includes: .75", 1.0", 1.5", 2.0", 2.5" - Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight...

For model #s 3850,4000,7000,7500,6900,6950----- Twin cutter / 9831 Grinding set----- Ammco part# 7681-6 FMC John Bean/Barrett # 91212----- RTI Models BRC500,BRC50-----3 cut edges---positive rake 500 series on the car lathe 6 bits per pack.

This high quality hose cutter provides a straight,even cut heater,air conditioning,braided rubber or plastic hose up to 1-1/8" diameter. Replacement blades are part number 10011 and are 2 blades per pack.

For Pro-Cut Model 610 On-The-Car Lathe---- Pro-Cut Part # 50-701---- 3 cut edges ---- positive rake for Fords 10 bits per pack.

For Pro-Cut Model 610 On-The-Car---- Pro-Cut Part# 50-741 Positive rake carbide---- 3 cut edges----positive rake for Fords 6 bits per pack.

RIGHT HAND AND LEFT HAND TOOL HOLDERS 3/8" Square Shank Fits ALL TOOL, AMMCO, HUNTER, PERFORMANCE, and RELS.-- Complete with Carbide Insert No. 06610. Number 06700 includes 2 holders, one right hand and one left hand, with bits.

For Model #s 1000,1001,3000,4000,4100,7000,7700------- On-vehicle lathe 700,705,710------- Drum side on 3850------12-18 cut edges----round bits for round tool holders 10 bits per pack.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

For Model #S 1000,1001,3000,4000,4100,7000,7700---------- On-vehicle lathe 700,705,710---------DRUMSIDE ON 3850 OEM # 6914-6-----12 CUT EDGES----NEGATIVE RAKE 6 bits per pack. California ResidentsWARNING

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Designed for the low-profile clamps used to hold C.V. Boots on FWD vehicles. The 02099 comes complete with a ratchet. We recommend using this tool when istalling our #87365 Crown victoria camber kit.This Part...

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits all FMC/JOHN BEAN Brake Lathes and ACCU-TURN. Complete with one carbide Insert No. 407----FMC/JOHN BEAN, ACCU-TURN

RIGHT HAND TOOL HOLDER 3/8" Square Shank Fits all FMC/JOHN BEAN Brake Lathes and ACCU-TURN. Complete with one carbide Insert No. 407----FMC/JOHN BEAN, ACCU-TURN

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062---

RIGHT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062---

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Designed for the PRO CUT on car lathes this silencer fits on top of the cutting tools, deflecting chips and dampening the chatter series.

Tein Click Assy Wrench 8mm (Silver)

Easily extract broken off cross pin bolts from a carrier. Yukon tools help save time and money by speeding up the installation process. All Yukon tools are manufactured to provide years of usage in any shop.

Whether you’re bending an emergency replacement brake line or putting together all new fuel lines for your project car, having an efficient and easy-to-use tube bender can make all the difference. Mishimoto’s 3-in-1 tube bending tool is all you’ll need...

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look...

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look...

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look...

Fits Toyota 7.5'', 8'', V6 and Landcruiser. Yukon tools help save time and money by speeding up the installation process. All Yukon tools are manufactured to provide years of usage in any shop.This Part...

The Hotchkis GM upper trailing arm bushing install and removal tool allows for easy removal and installation of new bushings in GM 10 and 12 bolt rear ends commonly found in GM A-Body vehicles. This tool makes a great addition to any professional or...

Fox Spanner Wrench (3.0 Backup)

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

AT107 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.This Part...

AT105 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.This Part...

PRO-TRUCK COILOVER 2.0 - Spanner Wrench Kit

Often overlooked, a pick, hook, and scraper set is convenient, serves a variety of functions, and should have a space in everyone’s toolbox. Mishimoto’s Pick and Hook Set includes six different hooks, two straight picks, and one gasket scraper. We’ve...

Extends 39-60" for standard & compact cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings.

The Honda Accord and Acura TSX Rear Adjustable Trailing Arm is an ideal replacement for a damaged OE component, Additionally, it will provide ±1" set-back/wheel base adjustment. This arm is necessary to to correct set-back changes that the 67545...

The upper control arm ball joint pinch bolt on the popular Audi A/S 4, 5, 6, and 7 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt & nut replacement kit has 720 hour saltspray certified coating to...

.25" ADJUSTER COLLAR SPANNER PIN WRENCH

Quickly and easily adjust rear toe on BMW 3-series (E36) models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW vehicles and save time on every alignment. Equivalent to...

For Model # 1000,1001,3000,4000,4100,7000,7700------ On-vehicle lathe 700,705,710----Drum side on 3850 Ammco part # 6914-10-----12 CUT EDGES---- NEGATIVE RAKE 10 bits per pack.

DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and...

Take the play out of front wheels during alignment! Place this spring loaded pressure bar between the tires to assure a more accurate alignment. A must for Mercedes vehicles!

Save time and make adjusting front camber and csater a one- person job on popular GM platforms with this turnbuckle design tool. Simply attach the tool to the front lower control arms and dial in finite changes on GM mid-size SUV's the Chevy SSR and...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

These wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the sleeve body.

This special 10 point socket is needed when removing the O.E rear lower control arm on new 2001 to 2006 Honda Civics, 2003 and up Elements, 2002 to 2006 CRV's and 2002 to 2007 Acura RSX's. Included with part numbers 69300 and 69400.This Part...

Radial Run-Out Gauge is an out of round condition in which the radius of the wheel or tire is not consistend from the wheel center to any point on the rim or the tread. Tire and wheel radial run-out are often factors in troubleshooting ride and...

Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate...

Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommended when installing our 25430, 25435, 25440 and 25445 replacement...

This two-piece internally threaded spring compressor is a great option for MacPherson Strut, coilover, and other sccessible springs. With 1-11" of travel and a 2645 lbf (1200kg) max qoekinf load with a 3X safety factor, this is an ideal tool for almost...