SPC Performance

Replace frozen or worn lower control arm bolts with SPC's replacement adjusters. Designed for the rigors of RAM heavy duty trucks, these high strength bolts come with a corrosion resistant coating...

For BMW E36, E46 and E85 bodied vehicles this tubular style arm is great when lowering this popular vehicle, or for correcting rear camber on stock vehicles. For high performance applications check...

With SPC's rebuild kit you can replace the ball joint or customize the stud length for ride height altered vehicles. 7.12° Taper - Stud Length +0.25" Over OE. Includes: Ball joint boot, ball stud,...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. 7.12° Taper - Stud Length +0.50" Over OE. Includes: Ball joint boot, ball stud,...

With SPC's rebuild kit you can replace the ball joint or customize the stud length for ride height altered vehicles. 7.12° taper - OE Stud Length. Includes: Ball joint boot, ball stud, ball joint...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. 9.5° Taper - Stud Length +0.25" Over OE. Includes: Ball Joint boot, ball stud,...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. 9.5° Taper - Stud Length +0.25" Over OE. Includes: Ball joint boot, ball stud,...

With SPC's rebuild kit you can replace the ball joint or customize stud length for ride height altered vehicles. 9.5° Taper - OE stud length. Includes: Ball joint boot, ball stud, ball joint race,...

Bring toe and camber back to factory specification on the rear of the Honda HR-V with these fixed change shims from SPC. This 18 piece set includes two of each type of camber and toe shim available...

This service kit is intended to help installers with 25460 or 25485 arms that have oversized or aftermarket knuckles. This insert kit includes 2 knuckle inserts, retaining circlips, castle nuts, and...

This master balljoint separator set from SPC is a must for any technician replacing balljoints, control arms, or tie rod ends on today's car and SUV's. With 4 different opening sizes ( 24mm, 27mm,...

Designed for the low-profile clamps used to hold C.V. Boots on FWD vehicles. The 02099 comes complete with a ratchet. We recommend using this tool when istalling our #87365 Crown victoria camber kit...

Extends 46-74" for light trucks & cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings.

Extends 39-60" for standard & compact cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings.

Take the play out of front wheels during alignment! Place this spring loaded pressure bar between the tires to assure a more accurate alignment. A must for Mercedes vehicles!

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.1° of toe change and can be stacked with up to two shims when...

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models neading rear tow adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.2° of toe change and can be stacked with up to two shims when...

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide +.25° of camber change and can be stacked with up to two shims...

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

This easy to install full contact shim set is perfect for Nissan Versas and Renault Clios needing rear camber or toe adjustment. SPC's fixed change shims will provide ±0.5° to ±1.0° of toe change and...

This full contact rear shim adds positive 0.5° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper...

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide +.5° of camber change and can be stacked with up to two shims...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...