Tools

Sparco Tire Bag Kart Blue

Tein Add Cap (Pair)

Torque Solution AVCS Intake Cam Sprocket Tool- Subaru AVCS Engines

This easy to use valve stem puller protects the wheel and rim while you get the job done quickly. Simply screw the pivoting head onto the valve stem, slide the hard rubber protecting block to the edge of the wheel rim, and remove the stem without rim...

This economical tool fits most cars & light trucks with split tie rod sleeves. Double-end feature makes 360 degree turns possible.

Using a shop press, the tool is designed for quick, easyremoval & installation of xAxis sealed flex joints with 40mmOD and up to 60mm wide; including part numbers 15623, 15625,15627, 15629, 15631, 15633, 15635, 15637, 15639, and 15643.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Using a shop press, the adapter is designed for quick, easy removal & installation of the 15611 xAxis sealed flex joint and any other bushing with a 2.5" OD.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Extends 46-74" for light trucks & cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings.

Ford Tauras & Mercury station wagons have a sprocket type cam to adjust rear toe. This tool engages the sprocket and allows the technician to turn the cam for required adjustments.This Part...

The new WIDE 10 & 20 degree screw in balljoint plates accomodate larger coil springs being used on many late model racing chassis. The wide plate allows plenty of room for both caster and offset adjustment.

The new WIDE 10 & 20 degree screw in balljoint plates accomodate larger coil springs being used on many late model racing chassis. The wide plate allows plenty of room for both caster and offset adjustment.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Great tool for any Heavy Duty shop that works on low boys, refers, log trucks and more. Now you can remove and replace the S-Cam bushing on air brake equipped trailers without removing the wheel hub or replacing the wheel seal. Save time and money...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

For Rels Models 204C,204D,204S,205DC,415- Rels part # 29687V For Van Norman Models 243XV,204C,204D,204S,205DC,415 Van Norman Part # 129687,866561 ----3 cut edges----positive rake 10 bits per pack.

For Van Norman Models 204S,Old Style,205DR,301,303,304,305 310,404,404.4 05 Van Norman Part # 302167 ---- 2 cut edges -- positive rake parallelogram drum bit 3 bits per pack.

Set includes the Dual Socket Inner Tie Rod Removal Tool along with 1-3/16", 1-5/16" and 1-7/16" hex tools. CAUTION: Not for use with impact wrenches (air tools). impact wrenches (air tools).

The 2 3/8" flat hex wrench is designed to make the installation of the 23852 and 23854 Dodge pin joints quicker and easier. Use a 1-1/2" socket to hold your adjsutment and then tighten the jam nut with this tool.This Part...

This board set gives technicians the tools needed to complete today's modern alignments quickly & efficiently. Contains our most popular tools, with a handy plastic peg storage board to keep all your alignment tools in one easy reference location...

This custom tool makes adjusting th OE camber cams on the rear of Audis a snap. Even with tires on and the suspension loaded you will be able to access and tighten the nut. Simply loosen the cam bolt, adjust the camber bolt with the bolt's hex pilot,...

This tool makes rear toe adjustments easy on many late model Hondas. The 24mm wrench can also be used for rear toe adjustment on the Acura ILX or for rear camber adjustment on Mini Coopers.This Part...

This 1-1/2" socket is useful for adjusting both the OEM and our popular 23130 & 23180 sleeve series for Ford and Mazda 2 & 4WD trucks with pinch bolt style suspension. FOR 1/2" DRIVES.

This fluid lubricates the 85125 rotary file set, and the 68670 Rotor-Bor to reduce stress on the cutting teeth. This product is highly recommended to prolong the life of all cutting bits used on steel. CAUTION: ALWAYS WEAR SAFETY GLASSES WHEN USING...

This 3/8" rotary file is specifically designed for aluminum. Use it to quickly and cleanly expand cam slots in aluminum brakets and frames. It is an ideal tool to use when installing SPC Nissan and Infiniti cams. Also is perfect when installing our...

This rotary file set is ideal for every technician. Be ready to elongate slots in Aluminum and Steel frames and brackets to accept larger offset cams. The kit includes one 85127 rotary file for steel and one 85137 rotary file for aluminum and cutting...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

High quality carbide rotary files, ideal for elongating strut holes on many vehicles. Use when installing 82110, 82120,and 87350 adjusters. May be used with 1/4" or 3/8" drills at high speeds. Available individually. Use with 85774 Cool Tool...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.This Part Fits:YearMakeModelSubmodel1998BuickRegal25th Anniversary Edition1988-1996BuickRegalCustom1989-1996BuickRegalGran...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.This Part Fits:YearMakeModelSubmodel2003-2006FordExpeditionEddie Bauer2006FordExpeditionKing...

No-Mar coated jaws allow harmless removal and installation of chrome nut covers on light truck, motor home, and over-the-road truck lug nuts.

This tool for fine,accurate,easy adjustments of camber or caster on GM vehicles. No extra parts or cutting/grinding needed.This Part Fits:YearMakeModelSubmodel1979-1985BuickRivieraBase1982BuickRivieraLimited...

Removes tie rod ends with a straight, fast, firm pull. Makes installation of the 87330 camber/toe kit easier. It has a 2-1/4" reach adn a 2-1/2" spread. Also for pressing bushings. Replacement center screw with tip is part number 83707.This Part...

This heavy duty wheel weight tool has a special grip hammer and pliers for removal and installation of truck wheel weights. If you are using steel wheel weights, instead of lead wheel weights, this is the tool for you.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.This Part...

A must for every alignment tech, this spec book lists all major alignment angles for all vehicles from 2013-2023. Front caster, camber and toe, rear camber and toe, along with SAI and turning angle are presented in an easy to read format. Also included...

For quick and easy removal of indentations on wheel flanges and rims of most vehicles. Allows proper tire seating,giving greater tire protection and durability. This tool is powder coated for added durability.

For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits per pack.

For Kwik Way Models SDL,DL,850 Disc Lathe,NDL,BDL,CBL----- Kwi-Lathe On-The-Car #108-0005-04 ROTUNDA,LINE-O-TRONICS---- Kwik-Way part# 109-1092-23---- Rels Model SW504 Swing Arm -Rels Part # SW4236-15---- For Snap-On Models YA180,YA281 -Snap-On Part #...

This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes.

This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes.

A must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This product is not a locking device. Use only according to...

An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal. CAUTION: Use only according to directions packaged with product.

This tool is specifically designed for use on the Ford Super duty trucks as well as most other light trucks and vans as well. The extra long bar gives you maximum leverage to loosen rusted sleeves without injuring your knuckles. This 8 position tool...

The 76000 Mercedes C & E Class Rear Bushing Press Adapter Kit is designed for quick, easy removal of the OE rear control arm bushings and for the installation of the new adjustable camber bushings. This is a necessary kit for installing SPC's 28850 &...

This heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one piece construction and has a lifetim e...

This heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one piece construction and has a lifetim e...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Turn any 1/2" (12mm) hole into a precise and clean 8mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" (38mm). Use this tool to quickly and...

Turn any 1/2" (12mm) hole into a precise and clean 14mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" (38mm). Use this tool to quickly and...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's and an offset punch for GM's newer models...

Save time and trouble when installing SPC's adjustable truck sleeves by using this double sided wrench. This wrench is specifically designed to be used with our 24220 and 24230 sleeves and makes on-the-truck adjustments a snap.This Part...

Save time and money on pitman arm removal jobs with this heavy duty low-profile pitman arm puller tool. Made with forged steel jaws, the low profile design removes the need to remove the steering box. Specially designed for work on 3/4 & 1 ton trucks of...

Designed to handle the toughest job,the 73119 is adjustable and has special forged jaws shaped to fit the job. Positive grip allows this tool to do many other pulling jobs Jaws open up to 2 1/8". CAUTION : NOT FOR USE WITH IMPACT WRECHES (AIR TOOLS)This...

This tool is a must when servicing rebuildable ball joints from SPC. The 30mm spanner wrench has 5mm pins and is specifically designed for SPC's p/n 72610 Porsche arms and Builder Series of ball joints. The steel spanner features a 3/8" square drive to...

SPC aluminum panhard bars provide weight savings and adjustability! Manufactured from aircraft grade aluminum, precision TIG welded, and then black anodized, the SPC panhard bar is the lightest durable unit on the market. High durometer vulcanized rubber...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

These tie rod tools spread the tie rod adjusting sleeve for easier adjustment. You can use these tools with a breaker bar for additional power. With 1/2" drives.

These tie rod tools spread the tie rod adjusting sleeve for easier adjustment. You can use these tools with a breaker bar for addition power. With 1/2" drives.

This tie rod tool spreads the tie rod adjusting sleeve for easier adjustment. You can use these tools with a bracker bar for additional power. With 1/2" drives.

This kit includes part numbers 71959 through 71999. It will allow adjustment of most cars and light trucks and also includes the two larger adjusting tools needed for the new Ford Super Duty pickups. Tools have a 1/2" drive opening that allows the use...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Four position feature and 360° rotation lets you grip the sleeve properly, even with limited access. Fits most passenger cars & light trucks.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Find out your correct torquing specs quickly and easily with this handy chart. Referenced by both car/truck make/model/year and torque stick color, this chart is the quick guide all techs need. 13" x 14.75".

Red print on white base-1.5" X 5" vinyl sticker that proclaims you have the best in performance alignment. These stickers look great whether you use them for your windshield, side window or just to put on your tool box.

Easily and quickly remove and install rear trailing arm bushing in as little as 15 minutes per side vs. the factory "book" time of 1.8 hours per side. No need to remove the trailing arm from the vehicle or use a hydraulic press.This Part...

This angle gauge is an easy, accurate way for measuring frame & drive shaft angles. An ideal tool to ensure the drive line angle is still within specification for raised & lowered vehicles.---------------------- Alignment equipment manufacturers are...

Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Flange type axle puller can be used as a regular wheel puller or hub puller, as well as a flange type puller. The bolt circle range is from 4-1/2" to 5-1/2", which covers all cars and small trucks with flange type axles. The four slots allow this tool to...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

498 removes front hubs on vehicles with independent front suspensions. Remove screw and use it with 499 axle puller to remove axles in compact cars. 498 set includes 498-1, 498-2 and 498-3

This wrench makes it easy to adjust the upper control arm cams on Chevy Express and GMC Savana vans. The tool surround surrounds the entire perimeter of each cam to provide a solid no slip means to move the hard-to-reach and often rusty OEM cams.

Aligning these trucks can be difficult because it is impossible to access the head of the cam bolt to adjust alignment angles. This special grooved socket fits over the end of the bolt allowing the technician to turn the alignment cams to change...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This sleeve extracting rod fits into our 4434 C-Frame. The machined rod enables extraction of Toyota truck OE control arm cam sleeves that are often difficult to remove. The 44339 forcing rod can be used in your existing Specialty Products 40910 or 40920...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.