Alignment Kits

Use this patented design with the most adjustability and best clearance of any arm on the market to modernize the front suspension on your classic Chevy. SPC uses a 1/2" extended ball stud to improve camber curve, now adjust in some caster and a bit of...

Easily adjust rear toe on Subaru Legacy, Baha and Outback models with this adjustable control arm from SPC. This arm provides +-1.0deg change with easy on-car turnbuckle style adjustment. The kit also includes replacement control arm hardware coated in...

Zone Offroad 07-18 Jeep Wrangler JK Alignment Cam Locks

These economical over-the-road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect...

Adjust front camber ±.75° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will...

Add rear camber adjustment to your Ford truck or SUV with this adjustable length control arm from SPC. An adjustment range of ±3.0° will get your vehicle back to factory specifications ensuring proper tire wear, improved handling, and excellent ride...

Replace your OE adjusters with this cam bolt kit from SPC. The OE bolts on Toyota trucks and SUV's are frequently "fronzen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to +-1.5deg camber...

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

These over-the-road heavy duty truck axle shims are a fast a nd accurate means to align front or rear axles of most popul ar tandem trailers and trucks. Specialty Products' new Zinc Alloy shims offer another level of performance versus our tr aditional...

These economical over-the-road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect...

These are the standard. Top of the line compression strength and hardness means that when you set your alignment - it do esn't change. NOTE: Ordering one Part Number supplies six sh ims in a box. When placing order spring pad length and width are...

These over-the-road heavy duty truck axle shims are a fast a nd accurate means to align front or rear axles of most popul ar tandem trailers and trucks. Specialty Products' new Zinc Alloy shims offer another level of performance versus our tr aditional...

Use this patented design with the most adjustability and best clearance of any arm on the market to modernize the front suspension on your Mustang II custom build. SPC uses a 1/2" extended ball stud to improve camber curve, now adjust in some caster and...

Use this patented design with the most adjustability and best clearnace of any arm on the market to modernize the front suspension on your classic Chevy. SPC uses a 1/2" extended ball stud to improve camber curve, now adjust in some caster and a bit of...

Add an aggressive, ready to run stance to your F-body (1st Gen) with lower control arms from SPC. This pair of arms feature heavy duty 1.5" steel tubes with greasable delrin bushings giving you improved strength and handling. Updated geometry bolts in...

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Twice the coverage - half the inventory. Changes caster positive or negative from 1/2 degree to 4 degree. APPS: Any solid axle RWD or 4WD vehicle.

Full coverage of an assortment of shims, plus the tools needed to complete the installation. Hanging board allows for better inventory control.

This great new board set includes the most popular parts foraligning today's trucks and SUVs. Don't be caught withoutthe part you need. Shipped with our polymer display board.Board includes the following: 25435 Toyota 4Runner/Tacoma- Front Camber Bolts fo

Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B9 platform. This kit has four arms so you can change camber and caster ±1.5° on both sides. xAxis sealed flex joints replace the compliant inner bushings with a...

Adjust front camber and caster ±1.5° on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness...

Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B5/B6/B7 and C5 platforms. This kit has four arms so you can change camber and caster ±1.5° on both sides. xAxis sealed flex joints replace the compliant inner...

This kit replaces the outer bolt of the upper rear control arm and provides plus or minus 1° of camber adjustment. Perfect for lowered vehicles or standard alignments. US Patent Nos. 8,544,861 8,469,375 D783,393 Additional Patents Pending China Patent No...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This cutter, a must for properly cutting our EZ Shims (TM), is a great tool for a variety of cutting needs. Its thin cutting blades help prevent breakage and waste.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees...

These adjustable rear trailing arms for 2005-up Ford Mustang offer you the ability to adjust thrust, tracking, and pinion angle to optimal specs for your driving style or track conditions. Made of 6061 aluminum, these light weight, high strength arms...

Adjust front camber ±1.0° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will...

Adjust front camber ±.50° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will...

Keep this set of 8 front camber shims on hand so you are ready for the Hyundai Genesis, Equus, or Kia K900 that comes into the shop. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will...

This easy to install full contact shim set is perfect for Nissan Versas and Renault Clios needing rear camber or toe adjustment. SPC's fixed change shims will provide ±0.5° to ±1.0° of toe change and camber change.This Part...

This easy to install full contact shim set is perfect for Nissan Versas and Renault Clios needing rear camber or toe adjustment. SPC's fixed change shims will provide ±0.5° to ±1.0° of toe change and camber change.This Part...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Use this fixed change shim to adjust rear toe on the Honda Fit +-0.30deg. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure...

Use this fixed change shim to adjust rear camber on the Fiat 500 ±1.00°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71771-71779. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500 shims...

Use this fixed change shim to adjust rear toe on the Fiat 500 -.38°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500...

Use this fixed change shim to adjust rear toe on the Fiat 50 0 -.13¦. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500...

This full contact rear shim adds positive 1.0° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment. NOTE: Only use one shim per wheel. Stacking...

This full contact rear shim adds positive 0.75° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake Caliper shim included for correct hub to caliper alignment. Note: Only use one shim per wheel.Stacking...

This full contact rear shim adds positive 0.5° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment. NOTE: Only use one shim per wheel. Stacking...

This full contact set of 6 rear shims adds positive 0.5°, 0.75°, or 1.0° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment. NOTE: Only use one...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide -1.0° of camber change and can be stacked with up to two shims when combined with the toe shim series 71741 through...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide -.5° of camber change and can be stacked with up to two shims when combined with the toe shim series 71741 through...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide -.25° of camber change and can be stacked with up to two shims when combined with the toe shim series 71741 through...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide +1.0° of camber change and can be stacked with up to two shims when combined with the toe shim series 71741 through...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide +.5° of camber change and can be stacked with up to two shims when combined with the toe shim series 71741 through...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide +.25° of camber change and can be stacked with up to two shims when combined with the toe shim series 71741 through...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.5° of toe change and can be stacked with up to two shims when combined with the camber shim series 71751 through 71758...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.4° of toe change and can be stacked with up to two shims when combined with camber shim series 71751 through 71758.This...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.3° of toe change and can be stacked with up to two shims when combined with camber shim series 71751 through 71758.This...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.2° of toe change and can be stacked with up to two shims when combined with the camber shim series 71751 through 71758...

This easy to install full contact shim is perfect for PT Cruisers needing rear toe adjustment. SPC's fixed change shim will provide ±.1° of toe change and can be stacked with up to two shims when combined with the camber shim series 71751 through 71758...

This full contact rear series of 22 shims includes 2 toe shims each (± .10°, ±.20, ±.30, ±.40, ± .50°) and 2 camber shims each (+.25°, +.50°, +1.0°, and -.25°, -.50°, -1.0°) for PT Cruisers needing camber and toe adjustment. Combination adjustments can...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This easy to install full contact shim is perfect for European Models neading rear tow adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

This full contact shim corrects the camber angle on both AWD and FWD Toyota Siennas. The 71632 provides plus or minus 0.5° of camber change. The shim series can be stacked (up to 2) for additional camber change or to correct toe at the same time...

This full contact shim corrects the camber angle on both AWD and FWD Toyota Siennas. The 71631 provides plus or minus 0.25° of camber change. The shim series can be stacked (up to 2) for additional camber change or to correct toe at the same time...

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71625 provides plus or minus 0.5° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims...

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71624 provides plus or minus 0.4° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims...

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71623 provides plus or minus 0.3° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims...

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71622 provides plus or minus 0.2° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims...

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71621 provides plus or minus 0.1° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims...

This full contact rear series of 14 shims includes 2 toe shims each (± .10°, ±.20°, ±.30°, ±.40°, ± .50°) and 2 camber shims each (± .25° to ± .50°) for both FWD and AWD Toyota Siennas. Combination adjustments or changes up to 1° may be made by stacking...

Fix your rear toe and Hyundai Accent and Kia Rio models with this ±.38° shim from SPC. Fix tire wear, thrust angle, and poor drivability by getting the rear toe back into specification. Work on a lot of Accents and Rios? Consider stocking the 71070 set...

Fix your rear toe on Hyundai Accent and Kia Rio models with this shim set from SPC. Fix tire wear, thrust angle, and poor drivability by getting the rear toe back into specification. This kit includes 2 each of the 0.13°, 0.25°, 0.38°, and 0.50° shims...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.