Fittings

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

12AN Push-Lok hose end; To be used on 3/4" ID Push-Lok hose; Can be used on standard hose, hose clamps not recommended

Torque Solution Brass 1/8 in NPT Fitting: Universal Straight Barb

CNC Machined from steel and then zinc plated. Compatible with any 3/8 SAE quick connect female fitting.

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

+2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels.This Part...

DeatschWerks 6AN Male Flare to M16 X 1.5 Male Metric Adapter (Incl Washer) - Anodized Matte Black

19mm hose barb female to 10AN male straight adapter fitting. Anodized aluminum.

 No custom fluid cooler setup or high-performance engine build is complete without high-quality fittings to match. These Mishimoto adapter fittings are CNC-machined from aircraft grade aluminum to exact specifications, ensuring leak-free operation. This...

Torque Solution Weld On AN Flare Bung Male -10 AN Aluminum Universal

Fleece Performance Universal 5/8in Hose Barb to 3/4in-16 O-ring (-8 AN)

Fleece Performance 19-24 Ram 2500/3500 Cummins Billet Aluminum CCV Tube Coupler

DeatschWerks, LLC, founded in 2004, is a company dedicated to providing high-performance fuel system solutions. Located in Oklahoma City, Oklahoma, DW operates out of its own 36,000 sq. ft. facility that houses all of the company's functions including...

DeatschWerks 8AN Male Flare to Straight 3/8in Single Hose Barb - Anodized Matte Black

Fleece Performance 17-22 GM 2500/3500 Duramax MAP Sensor Spacer & Boost Reference Port

Koyo 08-15 Subaru WRX/STI 8mm Coolant Reservoir Adapter (For Part# VH091662)

Air Lift Swivel Elbow Fitting - 1/8in MNPT x 1/4in PTC

Torque Solution 02-07 Subaru WRX / 04-21 STI / 04-13 FXT PNP Map Sensor Harness Adapter

Stainless steel and aluminum construction. Screws into a 8AN ORB port and provides a swiveling 6AN female.

Rotating union fitting. 6AN ORB male on both sides. Intended to be used with Radium Engineering DMR fuel pressure regualtor to install into a fuel rail with a 6AN ORB port.

Radium Engineering 6AN Bulkhead With Jam Nut

You’ve poured everything you have into your build. It is pure personal expression. Fully refreshed and upgraded suspension. Wheels and tires suited for your objectives. Track pads that squeal at every stop. Larger turbo for more power. But in the thrill...

Panhard Rods from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable panhard rods feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum...

DeatschWerks 6AN Female Swivel 90-Degree Hose End CPE - Anodized Matte Black

Add some extra Mishimoto flair to your build with the Mishimoto Push-On 45 Degree -10AN Aluminum Swivel Hose End Fittings. Our hose fittings feature a 3/8? barbed end for a simple installation on a variety of hoses along with a -10AN fitting for easy...

Panhard Rods from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable panhard rods feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum...

Fitting 1/4in. PTC x 4AN MALE

Panhard Rods from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable panhard rods feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

Upper Trailing Arms from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable upper trailing arms feature high-strength 4140 alloy steel finished with a hard wearing black powder...

Old Man Emu is pleased to release Front Upper Control Arms for a range of popular 4wds. When an IFS vehicle is fitted with a suspension lift, the original caster and camber results can be pushed outside the factory adjustment settings. IFS vehicles...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

Radium Engineering 5/8in Barb to 10AN FST Fitting

Leak-free disengagement while retaining pressure; Simple push and twist operation

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

+2.5 and +3.5 degrees of caster and 1.5 negative degrees camber based on a 2 inch lift. A wheel alignment is required after installation and fender clearance should be checked when the vehicle is fitted with aftermarket tires and wheels.This Part...

Old Man Emu is pleased to release Front Upper Control Arms for a range of popular 4wds. When an IFS vehicle is fitted with a suspension lift, the original caster and camber results can be pushed outside the factory adjustment settings. IFS vehicles...

Old Man Emu is pleased to release Front Upper Control Arms for a range of popular 4wds. When an IFS vehicle is fitted with a suspension lift, the original caster and camber results can be pushed outside the factory adjustment settings. IFS vehicles...

Panhard Rods from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable panhard rods feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum...

Panhard Rods from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable panhard rods feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum...

As more vehicle manufacturers have moved to an independent coil over strut front suspension set up, demand has increased for aftermarket replacement bushes and components. Old Man Emu have now developed a range of complete Top Hat kits (strut bearing...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

Comprehensive research and vehicle testing as well as countless hours of engineering resources have made the Old Man Emu Suspension System hard to beat. An adjustable lower control arm kit was developed to allow a flexible solution to finetune caster...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

A rear panhard relocation bracket was developed to raise the rear roll center and center the axle under the frame. This relocation bracket corrects geometry at the lifted height and greatly improves vehicle dynamics.This Part...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

The complete Old Man Emu suspension range incorporates more than just 4X4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U-bolts, center bolts, spring liners, trim packers and suspension...

Panhard Rods from ARB are recommended for raised vehicles to reset axle location and geometry realignment. Old Man Emu's heavy-duty adjustable panhard rods feature high-strength 4140 alloy steel finished with a hard wearing black powder coat for optimum...

Fleece Performance Universal -10 to 7/8in-14 Straight Male Black w/ O-Ring

Oil filter relocation is a great way to address issues created by a confined engine bay, improve ground clearance to your filter, upgrade to a large-format filter, or simply make your oil changes more manageable. If you need components to relocate your...

Push to connect tube fitting for Radium fuel pressure regualtors. Replaces the hose barb fitting.

DeatschWerks, LLC, founded in 2004, is a company dedicated to providing high-performance fuel system solutions. Located in Oklahoma City, Oklahoma, DW operates out of its own 36,000 sq. ft. facility that houses all of the company's functions including...

DeatschWerks 6AN ORB Male to 5/16in Male Barb Fitting (Incl O-Ring) - Anodized Matte Black

First and foremost, Banks is an engineering firm staffed with world-class automotive people. Gale Banks Engineering applies an unmatched combination of experience, capabilities and design/engineering/manufacturing savvy to provide automotive services and...

Fleece Performance Universal -10AN 90Deg to Hose Barb - Black

DeatschWerks 6AN ORB Male to 3/8in Male Triple Barb Fitting (Incl O-Ring) - Anodized Matte Black

Inline swiveling fitttting. Male 10AN ORB and Male 6AN ORB provided. O-rings included.

Fuel pulse damper that can be used in-line with a fuel hose. Comes with adapter for 5/16 hose-barb connections

Radium Engineering Fuel Surge Tank 6AN Bulkhead Plate w/ Fittings and Nuts

Anodized aluminum adapter fitting. 10AN Female to 10AN Female.

Torque Solution Weld Bung 3/8in (-18) NPT Female Aluminum

360 degree swiveling fitting. Suitable for all fluids. Stainless steel and aluminum construction. Max 150psi operating pressure.

CNC machined aluminum with anodized finish. O-ring sealed. Swivels after installation.

This fitting screws into any female 6AN ORB port and provides a 360 degree swiveling 3/8 SAE quick connect male. This low profile fitting is safe for use with all fluids and is constructed from stainless steel and aluminum.

Pack of 15 aluminum acorn nuts. 10-32 thread. Non conductive. For use with Radium electrical studs.

Wrench-together 6AN 90-degree hose end for use with Radium universal PTFE Hose Kits.

Radium Engineering 6AN Female Fitting to 8.5mm Barb

360 degree swiveling fitting. Suitable for all fluids. Stainless steel and aluminum construction. Max 150psi operating pressure.

Adapter fitting. 4AN ORB male to 8MM hose barb.

Suitable for all types of rubber hose with 1/2" (12-14mm) inside diameter; Hose clamps are recommended

Suitable for all types of rubber hose with 3/8" (8-10mm) inside diameter; Hose clamps are recommended

M14 x 1.5mm inverted flare to -6AN male adapter (Shallow style); Anodized billet 6061 aluminum; Designed to convert OEM hard line flare fitting to -6AN; Resists all fuel types including methanol, ethanol, and E85This Part...

DeatschWerks 10AN ORB Male to 6AN Male Flare Adapter (Incl O-Ring) - Anodized Matte Black

Adapter fitting. 8AN ORB male to swiveling 10AN male flare. Stainless steel and aluminum construction.

This 90 degree swivel fitting screws into a 6AN ORB female port and has a male 5/16 SAE quick connect fitting. Compatible with all fuels and oils.

This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with all types of fluid. Constructed of stainless steel and aluminum.

Universal in-line check valve. Female 8AN ORB inlet, male 10AN flare outlet. Compatible with all fluids.

Machined aluminum; Black anodized; high strength double-layed cotton filtration element

Reduces fuel slosh noise and prevents fuel back flow; Compatible with all fuel types

Radium 6AN ORB w/ 10mm Barb to 6AN Male Bulkhead Fitting

Fuel pump inlet filter installs directly on fuel pump inlet port. Compatible with Ti Automotive E5LM pump.

Anodized aluminum adapter fitting. 10AN female to 6AN female.

Radium Engineering 8AN ORB to M12X1.5 Female Fitting

Aluminum PushLok hose end. 8AN, 45 degree. Black anodized.

One piece CNC machined 6061 aluminum adapter; Direct path for unrestricted flow; Lightweight and compact for tight areas; Bright-dipped green anodized surface finish for corrosion resistance against multiple fluids

Radium Engineering 3/8in SAE Male to 6AN Male

Converts 10AN ORB to 10AN male fitting; To be used with -AN hoses and fittings

Converts -8an to 1/8NPT; Commonly used for installing a fuel pressure gauge or pressure sensor; *always use PTFE tape or paste on NPT threads*

Swivel fitting. Stainless steel and aluminum construction. Screws into a 10AN ORB (O-ring port) and has a swiveling 3/8 SAE Quick Connect male.

This 90 degree fittings screws into a 10AN ORB female port and allows attachment of a 5/16 Quick Connect SAE hose fitting. Fitting swivels 360 degrees.