Camber Kits

These shims provide positive caster changes on early model downsize Jeeps by installing them between the lower control arm and the frame bracket. Stackable for larger changes. 6 Shims per package.This Part...

These adjustable bushings offer camber changes ±1.25° for the rear of Mercedes E Class (W211). Make the non-adjustable E Class adjustable for life by replacing the outer bushing on the upper control arms. Tight tolerances require that press adapter kit...

These adjustable bushings offer camber changes of ± 1.25° for the rear of many newer Mercedes platforms. Make these non-adjustable Mercedes adjustable for life by replacing the outer bushing on the upper control arms. Tight tolerances require that...

Adjust camber or caster ±.3° using the factory offset in the lower control arm bushings of many Mercedes C Class, CLK, and SLK passenger vehicles with this cam kit. Place the offset bolt in the forward arm's bushing to change caster or in the rearward...

Adjust camber or caster ±.3° using the factory offset in the lower control arm bushings of many Mercedes C, E, and S Class passenger vehicles. Place the offset bolt in the forward arm's bushing to change caster or in the rearward arm's bushing to...

Replace your OE adjusters with this Cam Bolt Kit from SPC. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ¦1.50¦ camber...

Replace OE cams on the lower control arm of Toyota's '86-'96 trucks & 4Runner as well as the 1993 to 1997 T100 with this kit. Get the ±1.5° camber/caster change you need with this kit.This Part...

Inventory getting out of hand? Just need to fill in a few odd sizes? An adjustable Sleeve may be just what you need. These sleeves can adjust camber and/or caster in a large variety of combinations.

These truck sleeve will correct alignment problems on the F450 and F550 Super Duty trucks with Dana Super 60 solid axles. To split camber and caster adjustment, rotate sleeve 45° Use the 23239 zero degree sleeve to determine the amount of change needed...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.This Part...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.This Part...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.This Part...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.This Part...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.This Part...

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to...

Being able to set the Caster and Camber Alignment into proper specifications is critical for balance and stability of your Ford Super Duty. ICON Vehicle Dynamics 2005-UP Ford Super Duty Alignment Cam Kit provides additional adjustment over stock to align...

ISR Performance Street Series Rear Camber Arms - Nissan 350Z / Infiniti G35 / 370Z

Replace frozen or worn lower control arm bolts with SPC's replacement adjusters. Designed for the rigors of Ram heavy duty trucks, these high strength bolts come with a corrosion resistant coating for long life. Adjust caster or pinion angle by ±2.0°...

Extend your toe adjustment range on the rear of many popular Honda and Acura models. SPC's extended cam kit more than doubles the change available, you will be able to get ±2.5° toe change. This cam bolt features a hex chromate free finish that offers a...

Rear Camber Arm, Total adjustment +0/-4.5 degrees with Pro-KitThis Part Fits:YearMakeModelSubmodel2021-2022ToyotaGR SupraA91 Edition2023ToyotaGR SupraA91-MT Edition2020-2023ToyotaGR SupraBase2020ToyotaGR SupraLaunch Edition2020-2023ToyotaGR SupraPremium

Skunk2s replacement Pro Series Plus Front Camber Kit Mounting Anchors are now available separately. Recondition older Pro Series Plus Front Camber Kits to like-new condition or easily convert any Tuner Series or Pro Series Front Camber Kit to Pro Series...

Camber Kit Replacement Bushing; Press-In Style; For Use w/Pro/Classic Series Front Camber Kit;This Part...

Skunk2s redesigned, low-deflection, polyurethane bushings are available separately and are compatible with all Skunk2 Rear Lower Control Arms and Rear Camber Kits. Important: Purchase includes two bushing halves. Each Rear Lower Control Arm and Rear...

BLOX Racing Competition Front Camber Kit - 1996-2000 Honda CivicThis Part...

BLOX Racing Replacement Competition sliding ball joints

BLOX Racing Rear Camber Kit - 1990-2001 Acura Integra / 1988-2000 Honda Civic CRX Del SolThis Part...

Red Polyurethane Bushing for select Skunk2 Rear Camber Kits (RCK) and Lower Control Arms (LCA). These are the classic polyurethane bushings used in Tuner Series LCAs that fit the 88-05 Civic, 90-01 Integra, 02-06 RSX, and 04-08 Honda Element (Non-SC)...

Skunk2’s completely redesigned, Gold Anodized Rear Camber Kit for the 12-13 Civic is here. Thanks to Skunk2’s new and unique telescoping, opposing-thread design, camber adjustments can now be made without having to disconnect the arm from the chassis...

Heim Joint Assembly (V3) for 06-15 Honda Civic and 13+ Acura ILX Rear Camber Kits. Features M22x1.5x50mm right-hand outer thread pitch. Can also be used to upgrade from previous V2 Urethane Bushing-Eyelet Assembly.This Part...

Powder-Coated finish for durability, Zinc- Plated components, Engineered cage angle reduction decreases stress on and increases life of the ball-joint. Mounting point moved inward to increase shock tower clearance.This Part...

Powder-Coated finish for durability, Zinc- Plated components, Engineered cage angle reduction decreases stress on and increases life of the ball-joint. Mounting point moved inward to increase shock tower clearance.This Part...

Powder-Coated finish for durability, Zinc- Plated components, Engineered cage angle reduction decreases stress on and increases life of the ball-joint. Mounting point moved inward to increase shock tower clearance.This Part...

Skunk2 designed its Pro Series Plus Front Camber Kit for the ’96-’00 Civic with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are serious about performance can now...

Skunk2 designed its Pro Series Front Camber Kit for the ’96-’00 Civic with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are serious about performance can now...

Skunk2 designed its Pro Series Plus Front Camber Kit for the ’92-’95 Civic, 93-97 del Sol, and 94-01Integra with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are...

Skunk2 designed its Pro Series Front Camber Kit for the ’92-’95 Civic, 93-97 del Sol, and 94-01 Integra with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are...

Fourth-Generation Civic and CRX owners rejoice! The Skunk2 Pro Series Front Camber Kit is finally here. Skunk2 designed the Pro Series Front Camber Kit for the '88-'91 Civic and CRX with specially engineered A-arms and ball joints that allow for maximum...

The adjustable camber kit second-generation Integra owners have been waiting for is finally here—Skunk2’s all-new Pro Series Front Camber Kit. Skunk2 designed its Pro Series Front Camber Kit for the ’90-’93 Integra with specially engineered A-arms and...

Hard Anodized Rear Camber Kit for the 2016-2020 Civic is based off of the same adjustable camber kit technology the company has been using on its own race cars for more than a decade. Thanks to the new and unique telescoping, opposing-thread design,...

Hard Anodized Rear Camber Kit for the 2016-2020 Civic is based off of the same adjustable camber kit technology the company has been using on its own race cars for more than a decade. Thanks to the new and unique telescoping, opposing-thread design,...

Based on Skunk2’s classic adjustable camber kit design it’s offered for more than a decade, Skunk2 designed its Tuner Series Front Camber Kit for the ’96-’00 Civic with the budget-conscious enthusiast in mind. Enthusiasts who are serious about...

Based on Skunk2’s classic adjustable camber kit design it’s offered for more than a decade, Skunk2 designed its Tuner Series Front Camber Kit for the 92-95 Civic, 93-97 del Sol, and 94-01 Integra with the budget-conscious enthusiast in mind. Enthusiasts...

Skunk2’s completely redesigned, Hard Anodized Rear Camber Kit for the 12-13 Civic is here. Thanks to Skunk2’s new and unique telescoping, opposing-thread design, camber adjustments can now be made without having to disconnect the arm from the chassis...

Skunk2’s completely redesigned, Gold Anodized Rear Camber Kit for the 06-11 Civic is here. Thanks to Skunk2’s new and unique telescoping, opposing-thread design, camber adjustments can now be made without having to disconnect the arm from the chassis...

Skunk2’s completely redesigned, Hard Anodized Rear Camber Kit for the 06-11 Civic is here. Thanks to Skunk2’s new and unique telescoping, opposing-thread design, camber adjustments can now be made without having to disconnect the arm from the chassis...

Skunk2’s Rear Camber Kit for the 01-05 Civic and 02-06 RSX is based off of the same adjustable camber kit technology the company’s been using on its own race cars for more than a decade. Skunk2’s Rear Camber Kit is a must-have for enthusiasts looking to...

Skunk2’s Rear Camber Kit for all ’88-’00 Civics and ’90-’01 Integras, including CRXs and del Sols, is based off of the same adjustable camber kit technology the company’s been using on its own race cars for more than a decade. Skunk2’s Rear Camber Kit is...

Skunk2 designed its Pro Series Front Camber Kit for the ’04-’08 TSX with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are serious about performance can now correct...

Quickly and easily adjust rear camber with this cam and bracket kit designed for the Ford Expedition. Simply replace the OE lock plate and dial camber in exactly where you need it. This kit features a 700 hr salt spray tested coating for corrosion...

ISR Performance Front Upper Camber Arm - Nissan 300ZX/R32 GTR

ISR Performance Rear Camber Kit for Nissan 350z / G35

ISR Performance Rear Camber Arm for Infiniti G37 Coupe

ISR Performance Front Upper Camber Arms Nissan 350z / Infiniti G35

ISR Performance Rear Camber Arms - Hyundai Genesis Coupe - Pro

Eibach Pro-Alignment Front Camber Bolt for 2022 Ford Maverick AWD (+/- 1.75 Degrees of Camber Adj.)This Part Fits:YearMakeModelSubmodel2021-2023FordBronco SportBadlands2021-2023FordBronco SportOuter...

Heavy duty turnbuckle adjustable control arms provides incremental on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.

Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.

A must for lowered vehicles, Whiteline camber adjusting correction kit, is designed to correct via fine tunning of camber settings with up to -3deg in 1deg increments of negative camber gain, perfect for track days and spirited driving! Resulting in a...

Extend total toe cahnge on many Scion, Lexus, and Toyota models with SPC's replacement rear toe adjustment arm. Many of these mondels come with factory adjustment but need more due to factory recalls, lowering, or collision repair. SPC's remove & replace...

UMI Performance 82-92 GM F-Body Spherical Caster/Camber PlatesThis Part Fits:YearMakeModelSubmodel1988ChevroletCamaroBase1982-1986ChevroletCamaroBerlinetta1985-1990ChevroletCamaroIroc-Z1987ChevroletCamaroLT1989-1992ChevroletCamaroRS1992ChevroletCamaroRS...

Fits all 2015-newer Ford Mustang ;On-car adjustable design;CNC-machined, internally fluted greasable Delrin bushings;Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends;CNC-machined 6061-T6...

Camber/Caster Control Arm - Front Camber +/-2.0, Caster 0.0 to +4.0 degrees of adjustment.This Part Fits:YearMakeModelSubmodel2010-2023LexusGX460Base2023LexusGX460Black Line...

Whiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance. The kit includes low compliance...

Whiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance. The kit includes low compliance...

Correct front pinion and caster issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL and will provide ±1.5° of adjustment. NOTE: You will need to slot the axle...

Get the optimum track set-up with SPC's 6-arm set. This set includes 2 each of the 72610 adjustable camber arms, 72630 adj. caster/setback arms, and 72640 adj. rear toe arms. With aggressive handling and maximum G's, track vehicles require the best...

Eibach Pro-Alignment Rear Toe Only Adjustment Kit for 03-08 Nissan 350z / 03-07 Infiniti G35 Coupe /This Part Fits:YearMakeModelSubmodel2003-2007InfinitiG35Base2007InfinitiG35Journey2007InfinitiG35Sport2004-2007InfinitiG35X2005Nissan350Z35th Anniversary...

Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you the same adjustment range as the factory cam, ±2° for...

Fits all 2015-newer Ford Mustang ;On-car adjustable design;High-durometer internally fluted polyurethane greasable bushings;Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends;CNC-machined...

Whiteline's "Vehicle Essential Kits" contain all the essential components to 'Activate More Grip'.This Part Fits:YearMakeModelSubmodel2009-2013SubaruForesterX2009-2013SubaruForesterX Limited2009-2013SubaruForesterX Premium2011-2013SubaruForesterX...

By matching key bushing, alignment and geometry products into one solution, Whiteline Essential Kits provide bang for your buck handling upgrades that simply Activate More Grip. Essentials include front camber bolts, front anti dive/ caster kit, steering...

Whiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. The kit includes low compliance synthetic elastomer bushings which help maintain...

Whiteline Fixed Camber kits provide additional camber angle resulting in increased grip during cornering and traction under power. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as...

Whiteline 17mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.This Part...

Whiteline 15mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.This Part...

Whiteline 16mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.This Part...

Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Whiteline 12mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Whiteline Fixed Camber kits provide additional camber angle resulting in increased grip during cornering and traction under power. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as...

Whiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance. The kit includes low compliance...

Whiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance. The kit includes low compliance...

Whiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tire contact resulting in improved vehicle handling and increased tire life. The kit includes low compliance synthetic elastomer bushings which help maintain...

Replace damaged or corroded factory alignment adjusters on the rear suspension of many Hyundai and Kia SUV models with these cam bolts from SPC. These bolts are designed to provide the same adjustment range as the original components while providing...

Replace corroded or damaged OE toe cam bolts on the rear of may late model Porsche vehicles with this replacement cam kit from SPC. This cam kit is designed to replace the factory adjusters and provide the same amount of adjustment as the factory part it...

Add a little horsepower, use grippy tires, launch hard, and take a corner at 1.5 G's. You need an adjustable rear control arm to optimize your tire contact by adjusting your camber. Be confident your arm is proven and reliable for the >1,000 pounds of...

Adjust toe ±3° with this pair of adjustable toe links. SPC's forged aluminum construction avoids any weight penalty while maintaining factory strength. The integrated ball joint means smooth bind free articulation and no maintenance required. Sold as...

Add camber adjustment to the rear of your Honda Odyssey with SPC's patented camber bolt. Simply replace the rear lower control arm bolt with SPC's bolt and get ±0.5° of camber change to get the vehicle back within specification. SPC uses a hex chromate...

Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and...

Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flex joint to reduce...

Extend your toe adjustment range on the rear of many popular Honda models. SPC's extended toe cam kit will allow you to get a full ±2.5° of toe change. This cam bolt features a hex chromate free finish that offers a 700hr salt spray test for the best...

Make rear camber on the Mazda CX-5 adjustable for life with this adjustable lower control arm and extended range toe cam kit. The remove and replace camber arm provides ±3.0° of change and the included extended range toe cam will get toe back to...

Replace your frozen toe cams on many Mazda vehicles while also adding more adjustability with this extended range toe adjustment kit from SPC. This cam bolt provides ±2.5° of adjustment through the unique stepped cam washer included in the kit. Use...

The Cam Bolt Kit is a replacement for the OE adjusters. The OE bolts on Toyota trucks and SUVs are frequently "frozen" and do not allow for adjustment. Remove the bolt assembly and replace it with an SPC cam kit to get up to ±1.50° camber and caster...

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to the knuckle. Simply determine what degree offset sleeve is already in the knuckle and replace it with a new offset. This six (6) piece...

Eibach Pro-Alignment Front Kit for 05-10 Scion tC / 08-10 Scion xB / 92-96 Lexus ES 300 /This Part...

Eibach Pro-Alignment Front or Rear Camber bolts for 01-08 WRX / 04-07 Scion xA Front Only/ 04-06 Sci

Eibach Pro-Alignment Rear Camber Arm Kit 98-05 BMW E46 323i/325i/328i/330i/328Ci/330CiThis Part...

Eibach Pro-Alignment Front Kit for 06-08 Eclipse / 02-05 Civic / 02-06 Civic CR-V / 02-04 RSXThis Part Fits:YearMakeModelSubmodel2013-2015AcuraILXBase2013-2014AcuraILXHybrid2002-2004AcuraRSXBase2002-2004AcuraRSXType-S2001-2006BMWX53...

Camber Arm. Rear - Camber +/-1.5, Toe +/-1.5 degrees of adjustment.This Part...

Eibach Pro-Alignment Rear Camber Kit for 95-96 Dodge Neon / 03-06 Neon SRT-4 / 9/97-10/99 Hyundai Ac