Fabrication

This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with all types of fluid. Constructed of stainless steel and aluminum.

Universal in-line check valve. Female 8AN ORB inlet, male 10AN flare outlet. Compatible with all fluids.

Machined aluminum; Black anodized; high strength double-layed cotton filtration element

Reduces fuel slosh noise and prevents fuel back flow; Compatible with all fuel types

Radium 6AN ORB w/ 10mm Barb to 6AN Male Bulkhead Fitting

Fuel pump inlet filter installs directly on fuel pump inlet port. Compatible with Ti Automotive E5LM pump.

Anodized aluminum adapter fitting. 10AN female to 6AN female.

Radium Engineering 8AN ORB to M12X1.5 Female Fitting

Aluminum PushLok hose end. 8AN, 45 degree. Black anodized.

One piece CNC machined 6061 aluminum adapter; Direct path for unrestricted flow; Lightweight and compact for tight areas; Bright-dipped green anodized surface finish for corrosion resistance against multiple fluids

Radium Engineering 3/8in SAE Male to 6AN Male

Converts 10AN ORB to 10AN male fitting; To be used with -AN hoses and fittings

Converts -8an to 1/8NPT; Commonly used for installing a fuel pressure gauge or pressure sensor; *always use PTFE tape or paste on NPT threads*

Fleece Performance 94-20 Cummins Factory Oil Feed Line Replacement (Holset Turbo)

Fleece Performance 03-15 Cummins Turbo Oil Feed Line Kit for S300/S400 Turbos in 2nd Gen Location

Swivel fitting. Stainless steel and aluminum construction. Screws into a 10AN ORB (O-ring port) and has a swiveling 3/8 SAE Quick Connect male.

This 90 degree fittings screws into a 10AN ORB female port and allows attachment of a 5/16 Quick Connect SAE hose fitting. Fitting swivels 360 degrees.

Swiveling low profile adapter fitting. Screws into 10AN ORB port and provides 12AN male flare. Stainless steel and aluminum construction.

Swiveling low profile fitting. Screws into a 10AN ORB female port and has a 10mm hose barb swivel.

This adapter fitting threads into a 10AN ORB port. Two 10AN male fittings are then available for attaching hoses to. The black portion swivels 360 degrees. Compatible with all fluids.

Stainless steel body, aluminum top. 360 degree swivel action. Installs into 10AN ORB port.

Swivel fitting. Stainless steel and aluminum construction. Screws into a 10AN ORB (O-ring port) and has a swiveling 6AN male flare fitting.

360 degree swiveling fitting. Stainless steel and anodized aluminum construction. Suitable for all fluids. Rated for use up to 150 psi.

This fitting screws into any female 8AN ORB port and provides a 360 degree swiveling 3/8 SAE quick connect male. This low profile fitting is safe for use with all fluids and is constructed from stainless steel and aluminum.

This 90 degree swivel fitting screws into a 8AN ORB female port and has a male 5/16 SAE quick connect fitting. Compatible with all fuels and oils.

360 degree swiveling fitting. Stainless steel and anodized aluminum construction. Suitable for all fluids. Rated for use up to 150 psi.

This low profile swiveling fitting screws into a 6AN ORB port and has a hose barb at 90 degree angle. Safe for use with all types of fluid. Constructed of stainless steel and aluminum.

Stainless steel and aluminum construction. Screws into a 6AN ORB female port and provides a hose barb connection that swivels 360 degrees. Suitable for all fluid types.

360 degree swiveling fitting. Screws into a 6AN ORB port and features a 10mm hose barb.

Radium Engineering 6AN ORB Swivel Banjo to 8AN Male

Swiveling fitting that will screw into a 6AN ORB port and provides a 6AN ORB female to use. Stainless steel and aluminum construction.

Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.

Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.

Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.

Press-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the press-in (not cast) nipple.

PTFE submersible fuel tubing. 5/16" inside diameter, 8.2" overall length.

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting for connecting a hose to.

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a high flowing vent-to-atmosphere swiveling 10AN male fitting.

Submersible PTFE tubing for use with submerged fuel pumps. 3/8" ID.

Convoluted PTFE tubing for use with submersed fuel pumps. 5/16" ID.

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.

This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.

High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative fuels. Fittings included.

Molded 6 gallon dump can. Compatible with all types of fuel. Includes 1.5" dry-break filler probe and accessories. Semi-transparent white color.

Molded 6 gallon dump can. Compatible with all types of fuel. Includes standard fill spout and accessories. Semi-transparent white color.

Replacement fitting for Radium Engineering Direct Mount Regulators (Gen 2 design).

8AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This hose is compatible with all types of automotive fluids including E85, gasoline, oil, power steering fluid,...

Set of brackets to retain fuel lines and brake lines on underside of Nissan vehicles including S13, S14, R32, R33, R34 and more. Billet aluminum, with hardware.

Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

Clear fuel filler hose. 36" length. 1.5" ID. Clamps included.

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.

Flexible fuel filler hose. 3 foot long, 1.5" inside diameter. T-bolt clamps included.

Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Aluminum construction. Black anodized color.

This CNC machined aluminum PCV valve can install to a 10AN ORB female port and allows connection of a 6AN hose. The valve contains all the same functionality as an OEM PCV valve, but designed for high performance use.

Set of 5 brackets. Attach to locations on the underside of the Nissan R35 GT-R to hold fuel lines and/or battery cables or other items.This Part Fits:YearMakeModelSubmodel2020NissanGT-R50th Anniversary...

This 360 degree swiveling fill neck bolts directly on to the Radium FCST at the 6-bolt fill neck location. Hose barb elbow will accept a 1.5" inside diameter hose. One-way flapper valve is included to prevent fuel back-flow in the event of a roll over.

Features roll-over protection and discriminator functionality. For use with Radium FCST and Radium quick-fill systems.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.

CNC machined aluminum universal PCV valve. 10AN ORB male threads. Compatible with Radium catch cans and other Radium PCV accessories.

Straight fill neck for 1.5" ID fill hose. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper.

Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.

Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.

Radium Engineering 12AN Female Fitting to Air Filter

INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM

For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In some parts of the world, the Evo X was not equipped with this sensor. So this part provides a way to plug the hole in the...

CNC machined aluminum. For 0.39 diameter tube. M6 screw included.

CNC machined and anodized. Uses OEM mounting studs and hardware. No drilling required.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

CNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

Flexible convoluted tubing. Resistant to all fuel types; Suitable for EFI fuel pressure.

Line and fittings for remote mounting a pressure gauge or pressure transducer. 1/8NPT compatible. Gauge sold separately.

CNC machined aluminum and anodized black. Mounts to frame rail using pre-existing holes.This Part Fits:YearMakeModelSubmodel1993-1998ToyotaSupraBase1993-1998ToyotaSupraTwin Turbo

Flexible convoluted tubing; Resistant to all fuel types; Suitable for EFI fuel pressure.

CNC machined Aluminum; Black anodized; Stainless steel hardware; Gasket included

Laser cut and formed 5052 aluminum; Black anodized; Permits easier access to the RH side of the engine; Ideal for use with Radium fuel rail kitThis Part...

Laser cut and anodized; Uses preexisting holes; No drilling is requiredThis Part Fits:YearMakeModelSubmodel2015MitsubishiLancerEvolution Final Edition2008,2010-2015MitsubishiLancerEvolution GSR2008,2010-2015MitsubishiLancerEvolution...

CNC machined Aluminum; Black and Green anodized; Stainless steel hardware; Low-profile design

CNC machined Aluminum; Black and Green anodized; Stainless steel hardware; low-profile design

24-bolt weld flange; CNC machined from 6061 billet aluminum

Replaces OEM fuel feed tube on the firewall to the engine; Uses PTFE hosing compatible with all fuel typesThis Part Fits:YearMakeModelSubmodel2015-2017SubaruWRXBase2015-2017SubaruWRXLimited2015-2017SubaruWRXPremium

Leak-free disengagement while retaining pressure; Simple push and twist operation

Leak-free disengagement while retaining pressure; Simple push and twist operation

Radium Engineering 3 Into 1 Distribution Block w/ Fittings

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware

Fuel pulse damper that can be used in-line with a fuel hose. Comes with adapter for 5/16 hose-barb connections

Direct mount fill neck and cap to be installed directly on to Radium FCST. Cap includes vent with roll over protection.

Flexible convoluted tubing; Resistant to all fuel types; Suitable for EFI fuel pressure.

Machined aluminum housing; anodized and laser engraved; 3 interchangeable orifices

Flexible convoluted tubing; Resistant to all fuel types; Suitable for EFI fuel pressure.

Green anodized aluminum bulkhead fitting; Used in Radium Fuel Surge Tanks after 2014; Requires a 9/16-18 threaded hole with chamfer to be drilled into the mating part for sealing. Barb is 8.5mm

Machined aluminum fill cap. Integragted vent with roll-over protection. O-ring included.

CNC machined Aluminum; Laser etched and anodized; Stainless steel hardware

Small O-rings for M5 bolts; Large O-rings for older style standard FST; Gaskets for newer style standard FST